IDGB-L
series
Digital PWM Controller [substitute]IDGB-L series
IDGB series, limited-time substitute
Due to the worldwide shortage of semiconductors and electronic components, the delivery time of components has become noticeably longer, and it is difficult to procure components used in controller., We have released a product with limited functions of the IDGB controller as a substitute.
* Orders for IDGB controller will resume as soon as parts procurement returns to normal.
There are two differences in specifications from the IDGB series.
- The variable output range may change slightly, causing variations in the output between the dimming range [0 to 15] and [245 to 255].
* There is a variation in output between [0 to 10] and [250 to 255] in the dimming range of the current product. - Auto MDI / MDI-X function will not be installed
Other than the above, there is no difference in specifications between the standard product and the alternative product.
Dec. 28, 2022 End of production
Replacement：IDGC series
| Model | Output Power |
Channel numbers |
Input Voltage |
Output Voltage |
External Light Control |
|---|---|---|---|---|---|
| IDGB-30M2-_-L | 30W | 2CH | AC100~240V | DC12V | ○ |
| IDGB-30M4-_-L | 30W | 4CH | AC100~240V | DC12V | ○ |
| IDGB-30M8-_-L | 30W | 8CH | AC100~240V | DC12V | ○ |
| IDGB-50M2-_-L | 50W | 2CH | AC100~240V | DC12V | ○ |
| IDGB-50M4-_-L | 50W | 4CH | AC100~240V | DC12V | ○ |
| IDGB-50M8-_-L | 50W | 8CH | AC100~240V | DC12V | ○ |
| IDGB-100M2-_-L | 100W | 2CH | AC100~240V | DC12V | ○ |
| IDGB-100M4-_-L | 100W | 4CH | AC100~240V | DC12V | ○ |
| IDGB-100M8-_-L | 100W | 8CH | AC100~240V | DC12V | ○ |
| IDGB-30M2-24-_-L | 30W | 2CH | AC100~240V | DC24V | ○ |
| IDGB-30M4-24-_-L | 30W | 4CH | AC100~240V | DC24V | ○ |
| IDGB-30M8-24-_-L | 30W | 8CH | AC100~240V | DC24V | ○ |
| IDGB-50M2-24-_-L | 50W | 2CH | AC100~240V | DC24V | ○ |
| IDGB-50M4-24-_-L | 50W | 4CH | AC100~240V | DC24V | ○ |
| IDGB-50M8-24-_-L | 50W | 8CH | AC100~240V | DC24V | ○ |
| IDGB-100M2-24-_-L | 100W | 2CH | AC100~240V | DC24V | ○ |
| IDGB-100M4-24-_-L | 100W | 4CH | AC100~240V | DC24V | ○ |
| IDGB-100M8-24-_-L | 100W | 8CH | AC100~240V | DC24V | ○ |
| IDGB-50M2-24-_-T-L | 46W | 2CH | DC24V | DC24V | ○ |
| IDGB-150M4-24-_-T-L | 144W | 4CH | DC24V | DC24V | ○ |
| IDGB-150M8-24-_-T-L | 144W | 8CH | DC24V | DC24V | ○ |
A Total Lineup of 63 Various Models
A total lineup of 63 various models with two kinds of output voltage of DC12V/24V, three capacities of 30W/50W/100W with three channel choices of 2CH/4CH/8CH each.
The various selections give you the best choice of the power supply depending on light combination and the environment.
Adjustable to DIN Rall Installation for 63 Sizes
Fullfiling External Control Function
The three lineup of “LAN communication/8 bit parallel communication”switch, “RS-232C communication/8 bit parallel communication” switch, “RS-485 communication/Analog 0-5V” switch are available as standard.
External light control can be chosen for your network environment.
※ If the terminal such as PC / PLC or HUB does not have the Auto MDI / MDI-X function, it is necessary to use a Straight Cable or Crossover Cable for the LAN cable.
If your PC or HUB has an Auto MDI / MDI-X function, you can use either a Straight Cable or Crossover Cable.
External ON/OFF Signal and Inverting Function of Lighting Output
The conventional products had a lighting fluctuation due to the a synchronism of an external ON/OFF signal and inner PWM cycle.
However, the PWM cycle of this product synchronizes with the external ON/OFF signal so it has no lighting fluctuation.
Various External ON/OFF Functions
With the external ON/OFF mode, the “High Mode” which enables the lighting to be turned off with the signal and the “Low Mode” which enavles the lighting to be turned on with the signal are switchable.
External ON/OFF type has “Normal type”, “Repeat type” which keeps lighting with one trigger, and “Single type” which turns the light on for one cycle with one trigger.
In all patterns, the delay time from the external ON / OFF signal to lighting can be set in the range of 0 to 9,999 μS for each channel (delay control).
The Digital Display with Good Visibility Makes Chacking the Set Value Easier
© Leimac Ltd. All Rights Reserved.
