IDMU
series
Light controller IDMU series
Dimming controller that can input and output trigger signals in both directions
- Optimized image capture timing Synchronous control of lighting on/off, strobe light emission, and trigger output to the camera
- Expandability High flexibility, and up to 40 channels available by connecting units
- Lighting control Lighting ON/OFF controllable by LAN communication
- Wiring-saving Only one LAN cable can control up to 40 channels
- Expanded product lineup The number of channels for both base and edge units is available in 4ch and 8ch specifications, and the output voltage is available in 12V and 24V, which can be connected in individual combinations.
- Programming function Multiple inspection stages can be controlled with a single trigger signal.
- Space saving DIN rail mounting for control panel integration
- Interface standards GigE Vision and GenICam (Generic Interface for Cameras) supported
Base unit
The basic unit is equipped with LAN communication function as the standard.
It is operated by constant voltage control and outputs using the PWM method.
| Model | Capacity | Channel Number | Input Voltage | Output Voltage | External Control |
|---|---|---|---|---|---|
| IDMU-P4B-12 | 72W | 4CH | DC24V | DC12V | LAN Communication |
| IDMU-P8B-12 | 144W | 8CH | DC24V | DC12V | LAN Communication |
| IDMU-P4B-24 | 144W | 4CH | DC24V | DC24V | LAN Communication |
| IDMU-P8B-24 | 288W | 8CH | DC24V | DC24V | LAN Communication |
Edge Unit
It is an expansion unit that can be connected to the base unit to increase the number of channels. (The edge unit cannot be operated alone.)
It is operated by constant voltage control and outputs using the PWM method.
| Model | Capacity | Channel Number | Input Voltage | Output Voltage | External Control |
|---|---|---|---|---|---|
| IDMU-P4E-12 | 72W | 4CH | DC24V | DC12V | Via base unit LAN communication |
| IDMU-P8E-12 | 144W | 8CH | DC24V | DC12V | Via base unit LAN communication |
| IDMU-P4E-24 | 144W | 4CH | DC24V | DC24V | Via base unit LAN communication |
| IDMU-P8E-24 | 288W | 8CH | DC24V | DC24V | Via base unit LAN communication |
Optional Unit
It is a control unit that can be connected to the base unit and set by manual dimming or parallel I/O.
| Model | Control Method |
|---|---|
| IDMU-OP-M | Manual dimming |
| IDMU-OP-PI | Parallel communication |
Up to 40 channels with free combination
Able to control up to 40ch at once by combining the base unit (4ch / 8ch) with up to 4 edge units (4ch / 8ch).
Able to mix output voltages of 12V DC output and 24V DC output.
IDMU / IDGB installation comparison
IDMU 12V/24V mixed use example
Programming Mode
It is able to turn on multiple lights in sequence with a single trigger signal.
The programming function allows you to set not only the order, but also the control of output, emission time, delay time, output pattern, external trigger output control, etc., to perform a variety of operations.
External trigger output function allows external synchronization.
It also has a trigger output function in addition to supporting trigger input.
It can synchronize with external devices such as cameras from IDMU.
It can perform image capture and operations in conjunction with lighting connected to the IDMU without preparing an external PLC by combining with the programming function.
GenICam support
In addition to conventional control by command, control by GenICam (SFNC v2.4) is also supported.
GenICam support facilitates operation and enables the reduction of restrictions based on the environment platform during installation and operation.
Various other functions are also supported.
- Lighting ON/OFF control by GenICam control and LAN communication
- DHCP/LLA support (automatic IP address acquisition function)
- GigE Vision support
Product Data Download
| Catalog | Download | communication specification | Members-Only |
|---|
*Please login from the member registration / login page for requesting a product trial or downloading members-only data.
Software License Agreement
Our company licenses the software and all data, hereinafter referred to as "software," which can be downloaded by agreeing to the terms of this license agreement free of charge.
This license agreement applies to our software and any copies made under this license agreement.
- Our company owns the copyright of the software, the materials related to it provided on this website, and any copies made under this license agreement.
- The unauthorized reproduction for the purpose of selling, transferring, or lending the software provided on this website to a third party is strictly prohibited except for internal use.
- The values obtained from the drawing elements of the downloaded data are not guaranteed to match the actual product.In addition, the contents and specifications of the software and registered products are subject to change without prior notice.Furthermore, we will not be held liable for any direct, indirect, or repercussive damages to the customer as a result of operating this software.
- This agreement comes into effect once a customer downloads the software.We retain the right to terminate this contract immediately in the event of the customer breaching this contract.>/br>Upon termination of this contract, the customer shall lose the right of use granted by us under this contract and return or erase the software and all copies thereof.
* Please read this license agreement before downloading this software.
* By downloading this software, the customer agrees to this license agreement.
* If you do not agree to this license agreement, please do not download this software.
© Leimac Ltd. All Rights Reserved.
