IDMU-OD

series

Overdrive ControllerIDMU-OD series

Overdrive controller capable of bidirectional trigger signal input/output

  • Optimized shooting timing　Synchronization control of overdrive illumination and trigger output to the camera is possible in synchronization with an external trigger.
  • Expandability　High channel expandability,
  • Lighting control　Lighting ON/OFF control is possible via LAN communication.
  • Reduced wiring　Up to 20 channels can be controlled with a single LAN cable.
  • Expanded Lineup　Both Base Units and Edge Units are available in 2-channel and 4-channel specifications, and can be connected in individual combinations.
  • Programming Function　Multiple inspection stages can be controlled with a single 1-channel input for inspection timing triggers.
  • Space Saving　Control panel built-in type with DIN rail mounting.
  • Interface Standards　Compatible with GigE Vision and GenICam (Generic Interface for Cameras).
IDMU series

 

Base Unit

This is a basic unit equipped with LAN communication functions as standard.

Model Channel Number Input Voltage Output Voltage Maximum Output Current External Control
IDMU-OD2B-36 2CH DC24V DC3～36V 11A LAN Communication
IDMU-OD4B-36 4CH DC24V DC3～36V 11A LAN Communication

 

Edge Unit

This is an expansion unit that can be connected to the base unit to increase the number of channels.　(The edge unit cannot be operated on its own.)

Model Channel Number Input Voltage Output Voltage Maximum Output Current
IDMU-OD2E-36 2CH DC24V DC3～36V 11A
IDMU-OD4E-36 4CH DC24V DC3～36V 11A

Up to 20 channels in any combination!

By combining up to four Edge Units (2ch/4ch) with a Base Unit (2ch/4ch), it is possible to control up to 20 channels at once.

IDMU-OD Product Description 01
Multifunction PWM controller： Cannot be combined with the IDMU series.

Programming function included

It is possible to turn on multiple illuminations sequentially with a single trigger signal.

The programming function settings allow you to set not only the sequence but also output control, light emission time, delay time, output pattern, external trigger output control, and more, enabling a wide range of operations.

IDMU-OD Product Description 04

External synchronization is possible with the external trigger output function.

In addition to trigger input support, it also has a trigger output function.

Synchronization with external devices such as cameras is possible from the IDMU-OD.

By combining it with the programming function, it is possible to perform imaging and operations in conjunction with illumination connected to the IDMU-OD without the need for an external PLC.

IDMU-OD Product Description 05

GenICam compatible

In addition to conventional command control, GenICam control is also supported.

GenICam compatibility reduces environmental platform constraints during installation and operation, making operation easier.

Other compatible functions

  • LAN communication, GenICam control for ON/OFF lighting control
  • DHCP/LLA compatible (automatic IP address acquisition function)
  • GigE Vision compatible

Product Data Download

Instruction Manual Members-Only

*Please login from the member registration / login page for requesting a product trial or downloading members-only data.

Software License Agreement

Our company licenses the software and all data, hereinafter referred to as "software," which can be downloaded by agreeing to the terms of this license agreement free of charge.
This license agreement applies to our software and any copies made under this license agreement.

  1. Our company owns the copyright of the software, the materials related to it provided on this website, and any copies made under this license agreement.
  2. The unauthorized reproduction for the purpose of selling, transferring, or lending the software provided on this website to a third party is strictly prohibited except for internal use.
  3. The values obtained from the drawing elements of the downloaded data are not guaranteed to match the actual product.
    In addition, the contents and specifications of the software and registered products are subject to change without prior notice.Furthermore, we will not be held liable for any direct, indirect, or repercussive damages to the customer as a result of operating this software.
  4. This agreement comes into effect once a customer downloads the software.
    We retain the right to terminate this contract immediately in the event of the customer breaching this contract.
    Upon termination of this contract, the customer shall lose the right of use granted by us under this contract and return or erase the software and all copies thereof.

* Please read this license agreement before downloading this software.
* By downloading this software, the customer agrees to this license agreement.
* If you do not agree to this license agreement, please do not download this software.