Automatic adjustment of controller output by detecting changes in light intensity.

• The IFBU-SET consists of the IFBU-SU sensor unit, the IFBU-RASPI of the feedback unit (FB unit), and the connection cable IC-MIL-FBU. It is possible to extend the function to adjust the brightness. (Sensor mode)
• By connecting to a camera that can output information obtained by processing images captured using IC-MIL-FBU-I/O and acquiring information, the brightness can be reduced without having to place a sensor in the area to be illuminated. It is also possible to extend the function that can keep the constant. (I/O mode)
• In the sensor mode, the brightness information is obtained from the brightness information received by the sensor unit, and in the I/O mode, the brightness information is obtained from the captured image processing information at the specified position. By adjusting, it is possible to emit light with constant light intensity.
• The sensor unit supports the entire visible light range from blue to red, and supports the standard illumination described in the Leimac catalog.
• By connecting to a HUB, up to four units can be connected to one controller.
• Dedicated software is prepared for controlling the FB unit, and upper and lower limits can be set for changes in the amount of brightness, and time can be set for feedback control.
• There is a storage function for setting values, and a PC is not required except for initial setting and setting change.
• The sensor unit, which also takes into account temperature changes, can be installed anywhere, and the FB unit body can be mounted in any location by miniaturization.

Usage configuration in sensor mode (example)

Based on the brightness information obtained from the IFBU-SU installed in the illumination area, the output value of the corresponding controller is adjusted to maintain a constant light intensity.

Usage configuration in I/O mode (example)

Based on the captured image processing information output from the camera, the output value of the corresponding controller is adjusted to maintain a constant light intensity.