Overdrive emission

Compared to the constant lighting intensity, it can emit light several times more instantaneously with a maximum output of 36V.

It is ideal for situations that requires high intensity for camera imaging, especially for inspection of high-speed moving objects.

Output voltage variable range, 6V-36V

• The minimum output voltage has been extended to 6V from the 12V of the conventional SAG power supply.
• Output control from lower light quantity becomes possible.

Output voltage control setting

• Output voltage can be set in 256 gradations from 6V to the output voltage upper limit (SAG value).
• Output voltage can be set from the main unit or external parallel 8-bit communication.
• It will be turned off when output voltage setting value is 0.

Various trigger functions

Three trigger types according to your usage conditions are selectable.

The light emission time can be set in units of 1μs (edge mode) which is more detailed than conventional products.

Internal trigger: Strobe light at a light emission frequency of 4kHz.

Light emission time: Off (pulse width 0) or 12.5μs.

External trigger / edge: light emit by receiving an external trigger.

The emission time is the pulse width setting time (0, 10 to 999 μs, 1 μs intervals).

External trigger / level: Light emitted by receiving an external trigger.

The light emitting time is the ON signal input time of the external trigger signal.

Easy connection without tools