Compact line lighting downsizing its size, power consumption, and mass.

Achieving compactness with high intensity and uniformity.
With a compact design on the short side of the housing, the light emitting surface is widened, which makes irradiation at an angle closer to the optical axis possible. At the same time, the weight is reduced to about 200g.
Easy wiring with an improved cable line. Inspection lines can be constructed in a narrower installation environment.

Lightweight, thin 8.2-mm dome light

Adequate clearance ensured between object and light.

Ideal for φ16 telecentric lenses

Small ring lighting ideal for φ16 telecentric lenses.

Easy installation without worrying about space with a thin design.

Designed with an inner diameter of 16mm that matches the barrel diameter of φ16 telecentric lenses.

Ideal for large objects and long-distance irradiation.

New bar lighting that achieves about 3 to 4 times that of the original IDBA-LE with our original optical technology.

Both a wide-angle light distribution S type, which can irradiate a short distance over a wide range, and a narrow-angle light distribution L type, which can irradiate a long distance powerfully, are available.

IDBA-LEH double-line type for higher brightness.

Ideal for large objects and long-distance irradiation.

New bar illumination that achieves about 2 to 4 times that of the original IDBA-LE series with our original optical technology.

Both a wide-angle light distribution S type, which can irradiate a short distance over a wide range, and a narrow-angle light distribution L type, which can irradiate a long distance powerfully, are available.

Please also consider the IDBA-LEH2 series, a higher brightness, double-row type.

Ideal for replacing fluorescent backlights

Large surface illumination ideal for image inspection backlights with high uniformity and a standard product range from A4 to A1 sizes.

The light emitting surface can be customized in increments of 100mm from 500mm to 2,400mm.

Compared to the IFPA series, the cost has been reduced by approximately 30%.

Multi-channel model that can irradiate from 8 segments

Lighting that can irradiate the IMAR series from 8 directions.

By combining images obtained by individually irradiating objects that are prone to halation from eight directions, it is possible to capture images with reduced halation.

Ideal for visual inspection of uneven objects.

Simplified analog output control power supply

Capable of controlling light in the range of 0 to 100% with a PWM frequency of approximately 80 kHz.

External ON / OFF control terminal is standard equipment.

IDPA has an input voltage of 100 to 240 V AC.※(Power cable supplied as standard is for 100 V AC.)

Compact and low price digital controller

Constant-current light control power supporting direct connection of IHV, IHVE, and IBF series.

With external ON / OFF and external 0-5V control function.

IDBA-LE-S type compact model

Optical design equivalent to the IDBA-LE series wide-angle model.
25mm x 25mm compact design.
The use of a movable nut makes mounting jig requests easy. Can be installed according to the usage environment.
A dustproof and waterproof IP67 model can also be manufactured.

1000 gradation output control possible every 100mm

Controller for IDBB-LSRH line sensor light

Since it’s a constant current control power supply, it’s suited for a line sensor camera and a high-speed shutter camera.

Capable of excellent output power over 1,300,000lx

A forced air cooling type is also available for the Brimax line light.

Forced air cooling system enables excellent output power over 1,300,000lx

Lineup includes the light emission sizes from 100 to 3,000 mm in 100mm increments.

World-class natural air cooling

Realize 1,000,000lx with natural air cooling.※WD=50mm

Capable of individual control in 100mm increments from a PC with dedicated power supply application

Lineup includes the emission light sizes from 100 to 3,000mm in 100mm increments

Highly cost-effective model

Smartly-priced high-performance line light by inheriting developed lighting technologies

Perfect for replacement of fluorescent light for inspection

Lineup includes the emission light sizes from 200 to 2,400 mm in 200mm increments

A maximum luminance of 100,000 cd/m² or more is secured.

B’C line lighting that meets IP67 standards

Waterproof specifications of the IDBA-SE series.

Compact design with 25mm width and 25mm height.

The product range includes a 12V specification up to 400mm at 50mm intervals, and a 24V specification up to 800mm at 100mm intervals.

Multi-position ring lighting conforming to the IP67 standard

Waterproof specifications of the IMAR series.

Two sizes of φ90mm and φ140mm are available.

Product range of 12V and 24V specifications.

Indirect Illumination with high luminance and uniform oblique light

It is an indirect Illumination to illuminate a low angle from four directions.

By adopting a new LED and reviewing the optical design, the light intensity is significantly increased by 4 to 7 times compared to the conventional product.

The housing radiation proofed by aluminum structure.

It is suitable for printing inspection, such as the expiration date for the light-emitting surface is a square.

It is a half mirror box that can be irradiated with the same axis as the camera axis by attaching to the IDBB-LSRA/RE series.

Because it is capable of inspection with regular reflection, it is useful for printing/character inspections and surface fine scratch inspections.

Inkjet droplet observation light source

It is capable of imaging individual ink-jet droplets in a flight state through nano-sec emission.

Thin, uniform, flat-surface lighting with low power consumption

It became thinner than the IFL series, the hight is less than 6mm, by reviewing the structure of the light guide plate emmiting system.

It is possible to install without having to worry about the equipment installation space.

It uses less power through ambient LED emission.

It is useable in a wide range of inspections as a backlight illumination.

If the brightness of the IFLA series is insufficient, please consider the IHM series / IDHM series.

Renewal of the standard Red LED

Red standard lighting using conventional bullet-type LED has been renewed with high brightness and high quality. * Excluding some models

External dimensions and mounting dimensions are the same as before and can be used for a wider range of applications.

Briback line light has been renewed.

Compact size with higher uniformity than conventional series.

Lineup includes white, red, and blue. Available in 100mm increments up to maximum length of 1,800mm.

Large, uniform surface Illumination

Large, uniform surface Illumination with high power LED.

Suitable for inspection of large sized objects such as platic bottles.

It enables the replacement of the large fluorescent lamp devices.

Unique special construction eliminates the need for air installation, and the system is fanless and naturally air-cooled.

Sizes available in muliples of 100mm.

Simultaneous release of short-distance and long-distance irradiation

It is the ring-based illumination of the B’C line. It is suitable for large size printing inspection, and a variety of applications.

B’C line illumination as well, We prepared two types of light distribution characteristics according to the application.

It can be used for wide range use such as attaching with robot arm tip for positioning inspection.

Constant-current controller for a wide range of lighting

It is constant-current light controller supporting direct connection of the IHV, IHVE, IBF series.

External light control can be chosen from analog 0-5V, 8-bit parallel, RS-232C, and LAN communication.