Fullfiling External Control Function

The three lineup of “LAN communication/8 bit parallel communication”switch, “RS-232C communication/8 bit parallel communication” switch, “RS-485 communication/Analog 0-5V” switch are available as standard.

External light control can be chosen for your network environment.

External ON/OFF Signal and Inverting Function of Lighting Output

The conventional products had a lighting fluctuation due to the a synchronism of an external ON/OFF signal and inner PWM cycle.

However, the PWM cycle of this product synchronizes with the external ON/OFF signal so it has no lighting fluctuation.

Various External ON/OFF Functions

With the external ON/OFF mode, the “High Mode” which enables the lighting to be turned off with the signal and the “Low Mode” which enavles the lighting to be turned on with the signal are switchable.

External ON/OFF type has “Normal type”, “Repeat type” which keeps lighting with one trigger, and “Single type” which turns the light on for one cycle with one trigger.

In all patterns, the delay time from the external ON / OFF signal to lighting can be set in the range of 0 to 9,999 μS for each channel (delay control).

The Digital Display with Good Visibility Makes Chacking the Set Value Easier

End of sale on March 31, 2022

Overdrive effects

By connecting the LED lighting of DC12V operation and operating overdrive up to 36V, it can be illuminated 4 times more brightly than steady light.

In situations where the workpiece moves at high speeds, high-speed moving body imaging can be realized by increasing the light intensity.

Increasing the aperture value of the lens increases the tolerance of the depth of field, and covers the small focus shift that is likely to occur due to the vibration of the device.

Improved output lower limit voltage value compared to conventional products

The output lower limit voltage value has been improved from 10.5V to 6V, and the output control range on the lower output side has been expanded.

Sequential output mode installed *From shipments after April 3, 2017

IJS dedicated sample software

You can easily set and check various setting items of the target power supply from a PC.

• Reading, changing, and saving output control settings (pulse width, output voltage, delay time, SAG value)
• Network settings (IP address / port number)

Sample software downloadable from the product page.

Compact Handy Size

By optimizing the design and increasing the density of mounted parts, the 30W2CH is the industry’s smallest with a compact size of about 1/6 of the standard, with a standard price is 24,000 yen for the ILP-30M2 and 36,000 yen for the ILP-60M2-24.

Recognizable Digital Pannel and Easy Setting

It is a PWM controlled power supply with a 1,000 level light control with recognizable digital panel.

The light control speed responds to the tuning speed of the switch which is quick setting.

In addition, the light control value can be locked by each channel with a long press of the button.

Perfect Synchronism of External ON/OFF Signal and Lighting Output

The conventional products had a lighting fluctuation due to the a synchronism of an external ON/OFF signal and inner PWM cycle.

However, the PWM cycle of this product synchronizes with the external ON/OFF signal so it has no lighting fluctuation.

External ON/OFF Signal and Inverting Function of Lighting Output

An external ON/OFF can be switched from the high mode which turns off the light with the signal to the low mode which turns on the light.

External ON/OFF signal is NPN open collector output/PNP open collector output.

Illuminance Distribution Chart(Reference values)

Functionnal Characterisisa

Brightness comparison with previous models

Effct

Special features