【Important】 Notice of IDGB-L Release replacing IDGB Controller

Due to the recent shortage of semiconductors and electronic components worldwide that has been a prominent long term issue, it has been difficult to procure components used in controllers.
 
We have released a product with some limited functions as a replacement for the IDGB controller.
Regarding the target product, we will kindly request you switch to the replacement once the component inventory is gone.
We regret any inconvenience caused by this change and would kindly like to request your cooperation.
 
 
【Standard and replacement products】

 
 
【Replacement Timing】
　As soon as the inventory of components for the IDGB controller is gone

　* Receiving orders for IDGB controllers will resume as soon as parts procurement returns to normal.
 
 
【Changes in replacements to standard products】

1.Differences in output variable range

  A duty ratio of 0 to 100% with an output frequency of 125 kHz can be dimmed in 256 steps.
  There are variations in output between the dimming range “0-15” and “245-255” in the replacement.
  * There are variations in the output between the dimming range “0-10” and “250-255” in the current product.

2.Differences regarding Auto MDI / MDI-X functions

  There is no Auto MDI / MDI-X function.
  If there is no Auto MDI/MDI-X function in the terminal (such as PCs or PLCs) or HUB, it is required to properly use a straight or cross cable in the connection with the LAN cable.
  If the computer or HUB has the Auto MDI/MDI-X function, either straight or cross cable can be used.

Other than the above, there is no specification difference between standard products and replacement products.

 
 
Please refer here for details.
If you have any questions regarding this change, please contact your sales representative.