Illumination for phosphor excitation with high power UV_LEDs

Illumination with high-power UV_LEDs ideal for excitation of phosphors.

Lineup of two types of irradiation distance, Long Type and Short Type.

Wavelengths can be selected from 365nm, 385nm, 395nm, and 405nm.

Lineup of 64 types in 8 sizes with luminous surface lengths ranging from 77 mm to 602 mm in 75 mm increments

Higher irradiation intensity is possible

Compared to conventional products of the same size (IDBB-CH series/）, it can provide 1.7 to 8.3 times higher illumination.

Imaging Example

Ideal for excitation of phosphors

In case of UV irradiation, it is possible to see even finer scratches.

Imaging example: can be made clearer by combining with a lens filter

Phosphor recognition of LED elements to check mounting and recognition of the presence or absence of flux, etc. is also possible.

UV inks that cannot be recognized by visible light can be visualized.

Aluminum moisture-proof bags, etc., which reflect diffusely in visible light and absorb UV, can be filtered to detect only excitation light.

Increased installation flexibility

The IDBA-CH series had screw holes only on the back for mounting, but the IDBC-CH series uses a slide nut fixing method with slide nut insertion slots on the back and sides.

The slide nut allows the mounting position to be set at any position on the slot. In addition to the standard M4 slide nut, it is possible to change to M3/M5 slide nuts (INBB series).

Diffuser plate can be attached

UV-compatible diffusers can be attached as an option.Two types of transmittance, 100% / 85%, are available

Installation is simply a matter of inserting the diffuser into the insertion slot and securing it with the supplied screws, so it is easy to add additional diffusers later.

About Lens Filters

Two types of lens filters are available: , a filter that transmits in the near-ultraviolet wavelength range of 300nm to 450nm, and , a filter that transmits wavelengths of 480nm and above.

Both filters are available in three sizes to match the camera lens

For more information, please contact our sales representative or click here.