Lighting equipment for phosphor excitation with high-power UV_LEDs

Lighting equipment equipped with high-power UV_LEDs ideal for excitation of phosphors

Two types are available: Long Type and Short Type, from which you can choose the irradiation distance.

Emission wavelengths of 365nm and 385nm are standard, and 375nm, 395nm, and 405nm can be produced by customization.

The luminous surface length is available in 9 sizes from 77 mm to 677 mm in 75 mm increments, for a total lineup of 90 types.

Increased flexibility in installation

The IDBA-CH series had screw holes only on the back, but the IDBB-CH series uses slide nuts for fixing and also has insertion slots on the back and sides.

The use of a slide nut for the fixing method allows the mounting position to be set at any position on the slot and also allows the M3/M5 slide nut (INBB series) to be used in addition to the standard M4 slide nut included.

Diffusimg plate can be attached

As an option, a diffusing plate for UV light can be attached.

Two types are available: 100% and 85% transmittance.

Diffusimng plate can be easily installed later by simply inserting the diffusing plate into the slot and fixing it with the provided screws.