Walking analyzer: Step Aid

 

 

 

Walking analyzerStep Aid

It measures the balance of loads on the left and right, generating an ideal gait.

Step Aid is a load measuring device one can use by just walking. It informs with sounds whether the walking load during rehabilitation is appropriate in real-time, and also visualizes the load state with a graph one can see at a glance. Due to its easy measurement of one or two leg loads, it allows efficient rehabilitation.

Two-minute Step Aid Promotional Movie

The realization of rehabilitation that does not rely on touch through using hearing- and sight-based feedback.

Step Aid is a shoe-shaped leg weight calculation balance aid.
This helps visualize the strength of the weight for which the patient had relied on their senses and it is possible to clarify the goal and evaluation of rehabilitation which can be expected to be useful for early recovery in treatment of lower limb fracture etc.

Features of Step Aid

Step Aid is a shoe-shaped leg weight calculation balance aid.
This helps visualize the walking weight which had been relied on the sense of the patient in rehabilitation.

  • Beepings sounds depending on foot pressure

    It gives an audible signal indicating the load weight.

    Step Aid is an easy-to-take-off shoe type. After putting it on and walking, our exclusively developed sheet sensor measures the load weight. There are two types of sounds: One signaling when walking with an appropriate load and one warning when the load weight is too much. When the load weight is too weak, there will be no sound. The sounds allow clear notification. Patients and rehabilitation staff can proceed with the rehabilitation with peace of mind.

  • Looking at the result of step aid

    Results can be visualized.

    One Handy Unit can measure each leg’s load weight, so the left and right balance can be monitored. The measurement result monitor shows the left and right balance as a graph.
    Rehabilitation for ideal walking is possible.

     

  • A step-aid recording progress

     

    Progress can be recorded.

    You can receive the load weight results on a computer. You can check the progress and the rehabilitation goals can be set based on the data. It is possible to receive data in a computer real-time. Information can be managed for each patient with dedicated software.

 

Product Lineup

  • Step aid device (One foot type)

    Step Aid single foot type

    Appropriate load weight range, minimum load weight line, maximum load weight line will be shown in the Handy Unit real-time. Rehabilitation can proceed while confirming the state of the load weight.

  • Step aid device (Both feet type)

    Step Aid both feet type

    Appropriate load weight range, minimum load weight line, maximum load weight line will be shown in the Handy Unit real-time. Rehabilitation can proceed while confirming the state of the load weight.

  • standard included software (SAPC)

    SAPC
    (Standard included software)

    Software to save to a computer. Data management can be carried out, it makes it easy to check patient’s data history and compare with the previous data.

  • Optional software for One foot type (PCSA)

    PCSA
    (Optional single foot type software)

    It measures and saves the data of single foot type in real-time on a computer. The measurement time can also use truncated storage space. Using a computer, the data management can be consolidated, and it is possible to compare with the patient’s previous data. (Charged service)

  • Optional software for Both foot type (PCSAW)

    PCSAW
    (Optional both feet type software)

    It measures and saves the data of both feet type in real-time on a computer. As it measures both feet at the same time, the left-right balance can be confirmed on the computer screen. Using a computer, the data management can be consolidated, and it is possible to compare with the patient’s previous data. (Charged service)

Product Specifications

■ Overall (common on single foot, both feet)

Load measurement accuracy Maximum allowable limit of error: 20-120kg at ±10%
Load weight measurement range 10-120kg (Can be specified at measurements of 1kg)
Load weight informing function A different buzzer sounds when within the appropriate load range and within an excessive load range
Additional Function Constant monitoring for battery depletion / Energy efficient
Terms of use Flat road surface in the hospital with the temperature of 20 ℃ ~ 30 ℃. No waterproofness
Trademark Number Registration No. 5425028
Common Name Walking analyzer
Report Number 25B1X10003000015
Sensor Patent Number No. 4860430

 

■ Battery

3 AA Nickel-hydrogen or Alkaline Batteries (4 batteries if for both feet) Battery-life approx. 20 hours

(Breakdown) 1 Shoe Unit (2 if both legs) + 2 Handy Units

 

■ Components

  • Pink sensor shoes

    Sensor Shoes Size Small
    (Pink)

  • White sensor shoes

    Sensor Shoes Size Medium
    (White)

  • Shoe unit

    Shoes Unit

  • Handy unit

    Handy unit

Sensor Shoes Small (Pink) (252×104×100mm Weight: Approx. 420g) Up to 24.0cm
Medium (White )(283×114×100mm Weight: Approx. 500g) 24.0cm-27.0cm
A shoe unit base is included for each the left and right foot
Shoes Unit Size: 99×63×27mm Weight: Approx. 70g
AA Battery (Nickel-hydrogen 1.2V Alkaline 1.5V) × 1 (In the case of both legs, 2 batteries)
Max rated supply voltage: 1.5V. Max current: 400mA.
Handy Unit Size: 140×80×25mm Weight: Approx. 190g per unit
AA Battery (Nickel-hydrogen 1.2V, Alkaline 1.5V) × 2
Max rated supply voltage: 3.0V. Max current: 400mA.
Rechargeable battery 4 pc
Charger 1 pc
Disposable shoe insoles 10 pcs
Neck strap 1 pc
USB cable 1 pc
Instruction manual,
associated documentation,
warranty
1 set

Product Warranty

Duration: 1 year from delivery date

If a failure occurs during the above warranty period due to a product defect, we will repair or replace the defective part free of charge. If the cause is not due to a product defect, a repair fee will be charged.

 

 

 

Responses to Implementation

Although Step Aid was originally developed for broken-leg rehabilitation, it is now used more widely by patients with paralysis due to brain disease.
Here is a video interview about rehabilitation using Step Aid.

  •  

    Leads to improved hospital management by shortening the length of hospital stays

    Japan Community Healthcare Organization Shiga Hospital

    Director of Orthopedic Surgery Dr. Minoru Sakaida

     

     

  •  

    Easy to understand in real-time

    General Foundation Sanyudo Hospital

    Rehabilitation Clinic Physical Therapist Dr. Rei Miyazaka

Download Product Data

Step Aid Catalog Download Data
Step Aid Product Details Download Data

 



 

page top