Model	IDMU-P8E-24
Product Number	448-535
Unit Type	Edge
Channe numbers	8ch
Output Power	288W (72W/2ch ※)
Input Voltage	DC24V
Output Voltage	DC24V
Lighting output adjustment range	Approximately 125kHz PWM, 1000 levels
External Trigger Input	8ch (NPN / PNP supported)
External Trigger Output	4ch (NPN / PNP supported)
Communication protocol	Leimac command(TCP/IP、UDP/IP)、GigE Vision(GeniCam support)
Other features	< Programming Mode >、DHCP/LLA
Output Connector	SM connector(SMP-03V-BC)
Operating Temperature	0~+40℃
Operating Humidity	20~85% (non condensing)
Weight	300g or less
Conformity Standard	CE(EN61010-1,EN55011,EN61000-6-2)
Accessories	EXT I/O Connector, BUS CONNECTOR

　^※ It is the total capacity of 2 channels. (The paired channels are as shown on the right [1-2, 3-4, 5-6, 7-8])

Model	IDMU-P4E-24
Product Number	448-530
Unit Type	Edge
Channe numbers	4ch
Output Power	144W (72W/2ch ※)
Input Voltage	DC24V
Output Voltage	DC24V
Lighting output adjustment range	Approximately 125kHz PWM, 1000 levels
External Trigger Input	4ch (NPN / PNP supported)
External Trigger Output	4ch (NPN / PNP supported)
Communication protocol	Leimac command(TCP/IP、UDP/IP)、GigE Vision(GeniCam support)
Other features	< Programming Mode >、DHCP/LLA
Output Connector	SM connector(SMP-03V-BC)
Operating Temperature	0~+40℃
Operating Humidity	20~85% (non condensing)
Weight	200g or less
Conformity Standard	CE(EN61010-1,EN55011,EN61000-6-2)
Accessories	EXT I/O Connector, BUS CONNECTOR

　^※ It is the total capacity of 2 channels. (The paired channels are as shown on the right [1-2, 3-4])

Model	IDMU-P8E-12
Product Number	448-525
Unit Type	Edge
Channe numbers	8ch
Output Power	144W (36W/2ch ※)
Input Voltage	DC24V
Output Voltage	DC12V
Lighting output adjustment range	Approximately 125kHz PWM, 1000 levels
External Trigger Input	8ch (NPN / PNP supported)
External Trigger Output	4ch (NPN / PNP supported)
Communication protocol	Leimac command(TCP/IP、UDP/IP)、GigE Vision(GeniCam support)
Other features	< Programming Mode >、DHCP/LLA
Output Connector	SM connector(SMP-02V-BC)
Operating Temperature	0~+40℃
Operating Humidity	20~85% (non condensing)
Weight	400g or less
Conformity Standard	CE(EN61010-1,EN55011,EN61000-6-2)
Accessories	EXT I/O Connector, BUS CONNECTOR

　^※ It is the total capacity of 2 channels. (The paired channels are as shown on the right [1-2, 3-4, 5-6, 7-8])

Model	IDMU-P4E-12
Product Number	448-520
Unit Type	Edge
Channe numbers	4ch
Output Power	72W (36W/2ch ※)
Input Voltage	DC24V
Output Voltage	DC12V
Lighting output adjustment range	Approximately 125kHz PWM, 1000 levels
External Trigger Input	4ch (NPN / PNP supported)
External Trigger Output	4ch (NPN / PNP supported)
Communication protocol	Leimac command(TCP/IP、UDP/IP)、GigE Vision(GeniCam support)
Other features	< Programming Mode >、DHCP/LLA
Output Connector	SM connector(SMP-02V-BC)
Operating Temperature	0~+40℃
Operating Humidity	20~85% (non condensing)
Weight	210g or less
Conformity Standard	CE(EN61010-1,EN55011,EN61000-6-2)
Accessories	EXT I/O Connector, BUS CONNECTOR

　^※ It is the total capacity of 2 channels. (The paired channels are as shown on the right [1-2, 3-4])

Model	IDMU-P8B-24
Product Number	448-515
Unit Type	Base
Channe numbers	8ch
Output Power	288W (72W/2ch ※)
Input Voltage	DC24V
Output Voltage	DC24V
Lighting output adjustment range	Approximately 125kHz PWM, 1000 levels
External Control	LAN communication
External Trigger Input	8ch (NPN / PNP supported)
External Trigger Output	4ch (NPN / PNP supported)
Communication protocol	Leimac command(TCP/IP、UDP/IP)、GigE Vision(GeniCam support)
Other features	< Programming Mode >、DHCP/LLA
Output Connector	SM connector(SMP-03V-BC)
Operating Temperature	0~+40℃
Operating Humidity	20~85% (non condensing)
Weight	300g or less
Conformity Standard	CE(EN61010-1,EN55011,EN61000-6-2)
Accessories	EXT I/O Connector, BUS CONNECTOR
Options	IDMU Edge Unit IDMU series IDMU-OP-M IDMU series IDMU-OP-PI IDMU series

　^※ It is the total capacity of 2 channels. (The paired channels are as shown on the right [1-2, 3-4, 5-6, 7-8])

Model	IDMU-P4B-24
Product Number	448-510
Unit Type	Base
Channe numbers	4ch
Output Power	144W (72W/2ch ※)
Input Voltage	DC24V
Output Voltage	DC24V
Lighting output adjustment range	Approximately 125kHz PWM, 1000 levels
External Control	LAN communication
External Trigger Input	4ch (NPN / PNP supported)
External Trigger Output	4ch (NPN / PNP supported)
Communication protocol	Leimac command(TCP/IP、UDP/IP)、GigE Vision(GeniCam support)
Other features	< Programming Mode >、DHCP/LLA
Output Connector	SM connector(SMP-03V-BC)
Operating Temperature	0~+40℃
Operating Humidity	20~85% (non condensing)
Weight	200g or less
Conformity Standard	CE(EN61010-1,EN55011,EN61000-6-2)
Accessories	EXT I/O Connector, BUS CONNECTOR
Options	IDMU Edge Unit IDMU series IDMU-OP-M IDMU series IDMU-OP-PI IDMU series

　^※ It is the total capacity of 2 channels. (The paired channels are as shown on the right [1-2, 3-4])

Model	IDMU-P8B-12
Product Number	448-505
Unit Type	Base
Channe numbers	8ch
Output Power	144W (36W/2ch ※)
Input Voltage	DC24V
Output Voltage	DC12V
Lighting output adjustment range	Approximately 125kHz PWM, 1000 levels
External Control	LAN communication
External Trigger Input	8ch (NPN / PNP supported)
External Trigger Output	4ch (NPN / PNP supported)
Communication protocol	Leimac command(TCP/IP、UDP/IP)、GigE Vision(GeniCam support)
Other features	< Programming Mode >、DHCP/LLA
Output Connector	SM connector(SMP-02V-BC)
Operating Temperature	0~+40℃
Operating Humidity	20~85% (non condensing)
Weight	400g or less
Conformity Standard	CE(EN61010-1,EN55011,EN61000-6-2)
Accessories	EXT I/O Connector, BUS CONNECTOR
Options	IDMU Edge Unit IDMU series IDMU-OP-M IDMU series IDMU-OP-PI IDMU series

　^※ It is the total capacity of 2 channels. (The paired channels are as shown on the right [1-2, 3-4, 5-6, 7-8])

Model	IDMU-P4B-12
Product Number	448-500
Unit Type	Base
Channe numbers	4ch
Output Power	72W (36W/2ch ※)
Input Voltage	DC24V
Output Voltage	DC12V
Lighting output adjustment range	Approximately 125kHz PWM, 1000 levels
External Control	LAN communication
External Trigger Input	4ch (NPN / PNP supported)
External Trigger Output	4ch (NPN / PNP supported)
Communication protocol	Leimac command(TCP/IP、UDP/IP)、GigE Vision(GeniCam support)
Other features	< Programming Mode >、DHCP/LLA
Output Connector	SM connector(SMP-02V-BC)
Operating Temperature	0~+40℃
Operating Humidity	20~85% (non condensing)
Weight	210g or less
Conformity Standard	CE(EN61010-1,EN55011,EN61000-6-2)
Accessories	EXT I/O Connector, BUS CONNECTOR
Options	IDMU Edge Unit IDMU series IDMU-OP-M IDMU series IDMU-OP-PI IDMU series

　^※ It is the total capacity of 2 channels. (The paired channels are as shown on the right [1-2, 3-4])

Base unit

The basic unit is equipped with LAN communication function as the standard.

It is operated by constant voltage control and outputs using the PWM method.

Edge Unit

It is an expansion unit that can be connected to the base unit to increase the number of channels. (The edge unit cannot be operated alone.)

It is operated by constant voltage control and outputs using the PWM method.

Optional Unit

It is a control unit that can be connected to the base unit and set by manual dimming or parallel I/O.

IC-MIL-BA2-20 is an I/O cable that can be connected to BASLER’s ace2 series.

This is a control cable used for external control of the IJS series, and is used to receive a trigger signal from the camera.

IC-MIL-BA-20 is an I/O cable that can be connected to BASLER’s ace series.

This is a control cable used for external control of the IJS series, and is used to receive a trigger signal from the camera.

IC-MIL-BA2-26 is an I/O cable that can be connected to BASLER’s ace2 series.

This is a control cable used for external control of the IDGB-PG series, and is used to receive a trigger signal from the camera.

IC-MIL-BA-26 is an I/O cable that can be connected to BASLER’s ace series.

This is a control cable used for external control of the IDGB-PG series, and is used to receive a trigger signal from the camera.

Imaging by multi-division illumination

		The following effects can be confirmed by illuminating light from different directions on the target object with the high-speed lighting synchronous image acquisition Starter kit. – Halation removal – Emphasis of defects   Imaging tests can be easily performed by combining our split lighting, high-performance controller, and control software.

Easy configuration via sample application

Using the image synthesis sample program, when the above 8 images are generated as a composite image,

 

 

　image processing can be performed with the best composite image for the desired inspection content by combining the 8 captured images, images such as [Average brightness image] [Halation removal image] [Regular reflectance image] [Surface curvature image] [Albedo image] [Surface height image], etc.

Split lighting

Lighting Type	Series	Channel Number	Light Color
Multi-position Ring Light	IMAR-D_-8ch series	8CH
Low Angle Direct Ring Light	IDR-LA-8ch series	8CH
Horizontal Opposed Ring Light	IDRA-T-8ch series	8CH
Bar Light	IDBA-Q series	4CH
Dome Light with 16ch-division	IDD-CB series	16CH

It is an example of the illumination that can be divided into 4ch, 8ch, and 16ch.

In addition, we have an abundance of multi-split lighting products, and customization is also possible.

Please contact our sales representative for details.

We will assist you in selecting the most suitable lighting.

Click here for inquiries

Controller

　It is a controller that supports high-speed lighting synchronous image acquisition.

Camera I/O Cable

　It is the I/O cable for the camera with the trigger output function used for high-speed lighting synchronous image acquisition.

Extension cables for split lighting

　It is an extension cable for split lighting.
　Robot cables have excellent flex resistance and torsion resistance, and are used for mechanical parts with moving parts.

Image Synthesis Sample Program

　Please contact our sales representative regarding the provision of image synthesis sample programs used for high-speed lighting synchronous image acquisition.

Click here for inquiries

Imaging example: Marking inspection on metal objects

Object: Marking detection on metal plates
– The reflection of the metal itself can be suppressed in the average image, whereas the roughness of the surface remains, and it becomes an image that is difficult to distinguish from the engraving. – Defects visible by light from a specific direction, such as scratches, are emphasized in canonical reflectance images, whereas the roughness of the surface is also emphasized, making it difficult to distinguish from the engraved mark. – The height image (filter processing) suppresses defects that were vaguely visible such as surface roughness, and images where the marking is clearly visible can be captured.

Imaging example: Detection of missing tablets

Object: Tablet with mottled surface
– The mottled pattern is clearly visible in the average image, and it can be confirmed when there is a contamination on the material, whereas the defect state of the surface becomes an image that is difficult to judge. – With height image, the image better emphasizes more defects that are difficult to judge from individual images of split lighting, such as bruises on the tablet surface.

Imaging example: Cup container (Cutting line on transparent container, printing on the back side)

Cup container: Upper transparent cutting line over the container, Printing over the back side film
– It is easy to recognize uneven processing such as plastic and straw beak on the transparent container on the top, engravings such as 238, printing on the film on the back side, etc., in the average image. – It is easy to recognize the cutting process applied to the transparent container at the top in the surface curvature image (filter processing).

Control Cable used for external control of IMC series etc.

Connector for the controller side	HIF3BA-10D-2.54R
Operating Temperature	0~+40℃
Operating Humidity	35~70% (non condensing)
Conformity Standard
RoHS Directive
China RoHS

Model	IDBB-LSRS2000W-S
Product Number	297-520
Color
Color temperature/Peak Wavelength	6000K typ.
Input Voltage	DC24V
Power Consumption	160W
Cable Length	300mm
Input Connector	Metal connector
Polarity	–
Operating Temperature	0~+40℃
Operating Humidity	35~85% (non condensing)
Weight	3150g
Conformity Standard	IEC62471
RoHS Directive
China RoHS
Cables	I-CB-S_R-MCC 24V DC Lighting Extension Robot Cable for High Capacity Light
Controllers	IWDV_-24 IWDV24 series

*Mass includes error.