Uniform illumination of objects with glossy/irregular surfaces

It is indirect illumination with an light guide plate.

Due to its lighting mechanics of no shadow of the elements, uniform irradiation is possible even on glossy objects with gloss or irregular surface.

Highly uniform, high-intensity thin-surface light

It is available in a wide range of visual inspection as a backlight.

High brightness uniformity than the IFL series so are arranged with High density chip LED.

Sizes are available in multiple of 30mm.

If large backlight illumination of 200mm × 200mm size or more is required, please consider the IFPA series.

Thin, uniform, flat-surface lighting with low power consumption

The light guide plate emission method, the biggest feature is the thinnest in our catalog and 8.5mm below the height of the lighting. Can be mounted without having to worry about the equipment installation space.

Emit light from the surrounding makes it power saving.

It is available in a wide range of visual inspection as a backlight.

If the brightness is insufficient in the IFL series, please consider IDHM series.

Flexible angle adjustment and independent light control

It is a direct-type surface-emitting lighting that implements a high density on a plane bullet-type LED elements.

Square oblique lighting is equipped with a 4 bar surface illumination angle of movable lighting one, can be varied freely irradiation angle.Control lighting each surface is also available.

Please use the diffuser and polarization plate to soften the glare of the LED element in a work shiny and if you have uniformity of the light emitting surface.

It can be widely used from oblique lighting to backlighting.

Direct-type flat-surface lighting with high-density bullet-type LED elements mounted on a flat surface.

We have many variations of each size and type of square and rectangular light emitting surface beyond those shown in this catalogue.

<

Please use a diffusion plate and a polarizing plate to reduce the reflection of LED elements when the light emitting surface needs uniformity or when the object is glossy.

For large objects and long-distance illumination

Selectable light distribution characteristics according to the irradiation distance and work size.

Amount of luminance increased dramatically by the power LED & optical design, light-emitting surface is even smaller than before.

Red has at least 10 times the light intensity of conventional lighting.To ensure high illumination over long distances irradiation of 1500mm or more.

The use of a movable nut makes mounting jig requests easy. Can be installed to suit the environment of the customer.

S type illuminates a wide area at close distances. L type provides bright illumination at long distances.White, red, blue, green, near-ultraviolet and infrared are also available.

Strong illumination from all directions

Mounting LED to the inner bowl enables a strong radiation from all angles.

The optional diffusing dome is effectively used to irradiate strong diffused light on a spherical objects without any shadow.

There is also a type that can divide LED rows into multiple upper and lower circuits and dim independently.

A special model has two or more LED lines vertically that have respective circuits to control light independently.

Highlighting irregular surface profile by irradiation from side

Horizontal Opposed Ring light mounted on the right beside the bullet-type LED elements.

Highlighting irregular surface profile by irradiation from the horizontal direction.

A diffusing ring can be attached.Enable to use with the dome Light.

Suitable for edge detection and scratch inspection

High brightness, and no reflection of the LED element due to a cylindrical diffuser. Even if small package size, Direct Lighting type with a Obliquely downward collection angle in spite of the small size W26 × D60 × H11.

In addition to white, red, blue, green, near-ultraviolet (405nm), and infrared are also available.We can customize the size and emission surface angle.

PWM Controllers and Strobe Controllers are available for drive.

Suitable for edge detection and scratch inspection

Low angle ring light condenses strong oblique light on the object at a close distance by mounting bullet-type LED elements on a board at a large angle.

Suitable for edge detection and irregular surface identification from a close distance.

Objects with the luster, You can easily screw the diffusion ring to prevent reflection of the device.

Wide range irradiation with LEDs mounted on a flat board.

Flat direct ring light mounted bullet-type LEDs on a flat board.

Comapred with direct ring light, this is effective for irradiating a wider area with the same number of elements.

The diffusing plate and the polarizing plate can be mounted easily by screws.

General ring light for a diverse range of visual inspection

This is a general bullet LED ring light where LED elements are mounted in high density.

The light is efficiently condensed to the center by the inclined board.

The diffusing plate and the polarizing plate can be mounted easily by screws.

Ideal for objects with mirrored surfaces

High brightness version of coaxial lighting IFV series.

It is suitable for the work that was not available convention Coaxial Lightning so far is dark.

Luminance is about 3-5 times brighter than conventional products in white, blue is about 7-9 times brighter.

Phenomenal brightness

Naturally cooled lighting for line cameras featuring world-class light intensity.

An original optical mechanism provides parallel beam as standard.Installing an optional condensing lens easily converts the IDBB-LSR series to a condenser-type model for increased intensity.

The IDBB-LSRA is available in sizes from 100 to 3,000 mm in 100-mm increments.

High capacity controller ideal for line sensors and large surface lighting

Ideal for line sensor cameras and high-speed shutter cameras due to variable output voltage.

The product range includes a digital type that can switch between LAN communication and parallel communication for external output control and an analog type of analog 0-5V.

High capacity constant voltage controller ideal for line sensors and large surface lighting

The variable output voltage system is ideal for line sensor cameras and high-speed shutter cameras.

It is capable of supporting large 24V DC light with power consumption of 100W/300W/600W and makes it possible to select an optimal light control by setting a low-voltage output limit.

It is possible to switch between ethernet and parallel communication for external light control.