Full lineup of 45 models with combinations of controller output capacity, external control method, etc.!

Digital dimming controller capable of 256 shades of dimming.

Total 42 types of input voltage AC100-240V compatible specifications with 2 types of output voltage (DC12V, DC24V)/3 types of controller output capacity (30W, 50W, 100W)/3 types of channels (2CH, 4CH, 8CH)/3 types of external control method (TP, S2, PV)

Total of 3 models with DC24V output voltage, 2 types of controller output capacity (50W, 150W), 3 types of channels (2CH, 4CH, 8CH), and 3 types of external control method LAN communication (TP) for DC24V input voltage.

The series has a full lineup of 45 models in total.

The optimal controller can be selected according to the combination of lighting used and the environment.

Enhanced external control functions

Three types of external control are lined up as standard: “TP: Ethernet communication,” “S2: RS-232C communication,” and “PV: 8-bit parallel communication switching/analog 0-5V switching.

You can choose the external control that best suits your network environment.

Programming Mode

TP types and S2 types are equipped with programming mode function

Configuration example

This series consists of two units, a Controller unit that supplies power and a trigger control unit that controls the light emission of the lighting for high-speed ON / OFF.

Up to 300W 24VDC lighting can be connected to the trigger control unit, and up to 2 trigger control units can be connected to the Controller unit.

In the configuration example, IWDV-600M2-24-SC is used for the trigger control unit and IWDV-100S-24 is used for the Controller unit.

About Responsiveness

It supports high speed even at 50kHz.

Expandable to two lights that can be connected per connector

This product expands the number of lights that can be connected to one connector of the IWDV48 series to two, allowing up to four lights to be connected to the power supply.

In the example above, two I-CB-S*-DNELs can be connected by connecting an I-CB-D0.3-EL to the top connector.

^{For IWDV-120S-48, the number of connectors is 1, so the maximum number of lights connected is 2.}

^{The * in I-CB-S*-DNEL represents the desired cable length (m).}

Brightness Comparison

Uniformity Comparison

Imaging Example

Lighting equipment for phosphor excitation with high-power UV_LEDs

Lighting equipment equipped with high-power UV_LEDs ideal for excitation of phosphors

Two types are available: Long Type and Short Type, from which you can choose the irradiation distance.

Emission wavelengths of 365nm and 385nm are standard, and 375nm, 395nm, and 405nm can be produced by customization.

The luminous surface length is available in 9 sizes from 77 mm to 677 mm in 75 mm increments, for a total lineup of 90 types.

Jan. 31, 2023 End of production

Replacement：IDBB-CH series

Lighting equipment for phosphor excitation with high-power UV_LEDs

Lighting equipment equipped with high-power UV_LEDs ideal for excitation of phosphors

Two types are available: Long Type and Short Type, from which you can choose the irradiation distance.

Emission wavelengths of 365nm and 385nm are standard, and 375nm, 395nm, and 405nm can be produced by customization.

Jan. 31, 2023 End of production

Replacement：IDHRA series